9ct Yellow Gold Swivel Back (2x plates)

Head Size - Oxford Oval specific

There are four head sizes to choose from in our Oxford oval range. These are measured in millimetres by length and width of the oval plate edge to edge. The sizes are:

• 10x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)
• 16x13mm (Men’s large)

Head Size - Cushion specific

There are three head sizes to choose from in our cushion range. These are measured in millimetres by length and width of the cushion plate edge to edge. The sizes are:

• 9x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)

Head Size - Stone Set specific

There are four head sizes to choose from in our oval stone set range. These are measured in millimetres by length and width of the oval surface edge to edge (including the metal around the stone). The sizes are:

• 12x10mm (Ladies regular)
• 13x11mm (Ladies large or Men’s small)
• 15x13mm (Men’s regular)
• 17x15mm (Men’s large)

Finger Size

Download PDF

Download PDF

Engraved Artwork

Our signet rings can be ‘deep seal engraved’ by hand which is a very specific style of engraving whereby the image and lettering is carved very deeply and in reverse. This traditional technique means that when the ring is pressed into softened wax to form the seal the resulting impression reveals the correct image.

Engraved Artwork

Our cufflinks and pendants can be engraved in what is called a ‘deep for show’ style, this means that the crest or initials are engraved as seen (as opposed to deep seal engraving which is in reverse and used for signet rings). It is not as deep an engraving as seal engraving but it produces a more aesthetic look for cufflinks and pendants.

Select A Family Crest

You can select a family crest or Regimental badge to be engraved from our constantly expanding database.

Upload File

You can Upload your own artwork (crest, logo, monogram, initials etc) in png, gif, jpeg or jpg format. Please note that all artwork uploaded to an order is subject to approval of feasibility.

Some very intricate patterns such as full Coat of Arms can only be engraved on the largest head sizes and will incur a further charge (extra £250). We will contact you if this is the case before proceeding with your order.

Unengraved Ring

Have your ring blank/unengraved.

Optional Seal Engraved Family Motto

Seal engrave your family motto on a ribbon below the crest on your ring, cufflinks or pendant. If there is an associated motto with your family crest then it will appear; otherwise you can manually type one.

Inscription

A short personal message can be inscribed inside the band of the ring, a date or initials are popular choices. A maximum of 25 characters is possible.

Delivery note

We will be in contact with you once your item(s) are ready to be dispatched or collect. Your order will be completed in approximately 5-6 weeks, with the exception of the hardstone signet rings and any item in platinum which will take 12-14 weeks.

Initials

Have up to three initials engraved on the ring and choose from one of our house engraving styles. The initials will be deeply engraved for show (they will not be reverse seal engraved like the crested rings).

Head Size - Oxford Oval specific

There are four head sizes to choose from in our Oxford oval range. These are measured in millimetres by length and width of the oval plate edge to edge. The sizes are:

• 10x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)
• 16x13mm (Men’s large)

Head Size - Cushion specific

There are three head sizes to choose from in our cushion range. These are measured in millimetres by length and width of the cushion plate edge to edge. The sizes are:

• 9x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)

Head Size - Stone Set specific

There are four head sizes to choose from in our oval stone set range. These are measured in millimetres by length and width of the oval surface edge to edge (including the metal around the stone). The sizes are:

• 12x10mm (Ladies regular)
• 13x11mm (Ladies large or Men’s small)
• 15x13mm (Men’s regular)
• 17x15mm (Men’s large)

Finger Size

Download PDF

Download PDF

Engraved Artwork

Our signet rings can be ‘deep seal engraved’ by hand which is a very specific style of engraving whereby the image and lettering is carved very deeply and in reverse. This traditional technique means that when the ring is pressed into softened wax to form the seal the resulting impression reveals the correct image.

Engraved Artwork

Our cufflinks and pendants can be engraved in what is called a ‘deep for show’ style, this means that the crest or initials are engraved as seen (as opposed to deep seal engraving which is in reverse and used for signet rings). It is not as deep an engraving as seal engraving but it produces a more aesthetic look for cufflinks and pendants.

Select A Family Crest

You can select a family crest or Regimental badge to be engraved from our constantly expanding database.

Upload File

You can Upload your own artwork (crest, logo, monogram, initials etc) in png, gif, jpeg or jpg format. Please note that all artwork uploaded to an order is subject to approval of feasibility.

Some very intricate patterns such as full Coat of Arms can only be engraved on the largest head sizes and will incur a further charge (extra £250). We will contact you if this is the case before proceeding with your order.

Unengraved Ring

Have your ring blank/unengraved.

Optional Seal Engraved Family Motto

Seal engrave your family motto on a ribbon below the crest on your ring, cufflinks or pendant. If there is an associated motto with your family crest then it will appear; otherwise you can manually type one.

Inscription

A short personal message can be inscribed inside the band of the ring, a date or initials are popular choices. A maximum of 25 characters is possible.

Delivery note

We will be in contact with you once your item(s) are ready to be dispatched or collect. Your order will be completed in approximately 5-6 weeks, with the exception of the hardstone signet rings and any item in platinum which will take 12-14 weeks.

Initials

Have up to three initials engraved on the ring and choose from one of our house engraving styles. The initials will be deeply engraved for show (they will not be reverse seal engraved like the crested rings).

Head Size - Oxford Oval specific

There are four head sizes to choose from in our Oxford oval range. These are measured in millimetres by length and width of the oval plate edge to edge. The sizes are:

• 10x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)
• 16x13mm (Men’s large)

Head Size - Cushion specific

There are three head sizes to choose from in our cushion range. These are measured in millimetres by length and width of the cushion plate edge to edge. The sizes are:

• 9x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)

Head Size - Stone Set specific

There are four head sizes to choose from in our oval stone set range. These are measured in millimetres by length and width of the oval surface edge to edge (including the metal around the stone). The sizes are:

• 12x10mm (Ladies regular)
• 13x11mm (Ladies large or Men’s small)
• 15x13mm (Men’s regular)
• 17x15mm (Men’s large)

Finger Size

Download PDF

Download PDF

Engraved Artwork

Our signet rings can be ‘deep seal engraved’ by hand which is a very specific style of engraving whereby the image and lettering is carved very deeply and in reverse. This traditional technique means that when the ring is pressed into softened wax to form the seal the resulting impression reveals the correct image.

Engraved Artwork

Our cufflinks and pendants can be engraved in what is called a ‘deep for show’ style, this means that the crest or initials are engraved as seen (as opposed to deep seal engraving which is in reverse and used for signet rings). It is not as deep an engraving as seal engraving but it produces a more aesthetic look for cufflinks and pendants.

Select A Family Crest

You can select a family crest or Regimental badge to be engraved from our constantly expanding database.

Upload File

You can Upload your own artwork (crest, logo, monogram, initials etc) in png, gif, jpeg or jpg format. Please note that all artwork uploaded to an order is subject to approval of feasibility.

Some very intricate patterns such as full Coat of Arms can only be engraved on the largest head sizes and will incur a further charge (extra £250). We will contact you if this is the case before proceeding with your order.

Unengraved Ring

Have your ring blank/unengraved.

Optional Seal Engraved Family Motto

Seal engrave your family motto on a ribbon below the crest on your ring, cufflinks or pendant. If there is an associated motto with your family crest then it will appear; otherwise you can manually type one.

Inscription

A short personal message can be inscribed inside the band of the ring, a date or initials are popular choices. A maximum of 25 characters is possible.

Delivery note

We will be in contact with you once your item(s) are ready to be dispatched or collect. Your order will be completed in approximately 5-6 weeks, with the exception of the hardstone signet rings and any item in platinum which will take 12-14 weeks.

Initials

Have up to three initials engraved on the ring and choose from one of our house engraving styles. The initials will be deeply engraved for show (they will not be reverse seal engraved like the crested rings).

Head Size - Oxford Oval specific

There are four head sizes to choose from in our Oxford oval range. These are measured in millimetres by length and width of the oval plate edge to edge. The sizes are:

• 10x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)
• 16x13mm (Men’s large)

Head Size - Cushion specific

There are three head sizes to choose from in our cushion range. These are measured in millimetres by length and width of the cushion plate edge to edge. The sizes are:

• 9x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)

Head Size - Stone Set specific

There are four head sizes to choose from in our oval stone set range. These are measured in millimetres by length and width of the oval surface edge to edge (including the metal around the stone). The sizes are:

• 12x10mm (Ladies regular)
• 13x11mm (Ladies large or Men’s small)
• 15x13mm (Men’s regular)
• 17x15mm (Men’s large)

Finger Size

Download PDF

Download PDF

Engraved Artwork

Our signet rings can be ‘deep seal engraved’ by hand which is a very specific style of engraving whereby the image and lettering is carved very deeply and in reverse. This traditional technique means that when the ring is pressed into softened wax to form the seal the resulting impression reveals the correct image.

Engraved Artwork

Our cufflinks and pendants can be engraved in what is called a ‘deep for show’ style, this means that the crest or initials are engraved as seen (as opposed to deep seal engraving which is in reverse and used for signet rings). It is not as deep an engraving as seal engraving but it produces a more aesthetic look for cufflinks and pendants.

Select A Family Crest

You can select a family crest or Regimental badge to be engraved from our constantly expanding database.

Upload File

You can Upload your own artwork (crest, logo, monogram, initials etc) in png, gif, jpeg or jpg format. Please note that all artwork uploaded to an order is subject to approval of feasibility.

Some very intricate patterns such as full Coat of Arms can only be engraved on the largest head sizes and will incur a further charge (extra £250). We will contact you if this is the case before proceeding with your order.

Unengraved Ring

Have your ring blank/unengraved.

Optional Seal Engraved Family Motto

Seal engrave your family motto on a ribbon below the crest on your ring, cufflinks or pendant. If there is an associated motto with your family crest then it will appear; otherwise you can manually type one.

Inscription

A short personal message can be inscribed inside the band of the ring, a date or initials are popular choices. A maximum of 25 characters is possible.

Delivery note

We will be in contact with you once your item(s) are ready to be dispatched or collect. Your order will be completed in approximately 5-6 weeks, with the exception of the hardstone signet rings and any item in platinum which will take 12-14 weeks.

Initials

Have up to three initials engraved on the ring and choose from one of our house engraving styles. The initials will be deeply engraved for show (they will not be reverse seal engraved like the crested rings).

Head Size - Oxford Oval specific

There are four head sizes to choose from in our Oxford oval range. These are measured in millimetres by length and width of the oval plate edge to edge. The sizes are:

• 10x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)
• 16x13mm (Men’s large)

Head Size - Cushion specific

There are three head sizes to choose from in our cushion range. These are measured in millimetres by length and width of the cushion plate edge to edge. The sizes are:

• 9x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)

Head Size - Stone Set specific

There are four head sizes to choose from in our oval stone set range. These are measured in millimetres by length and width of the oval surface edge to edge (including the metal around the stone). The sizes are:

• 12x10mm (Ladies regular)
• 13x11mm (Ladies large or Men’s small)
• 15x13mm (Men’s regular)
• 17x15mm (Men’s large)

Finger Size

Download PDF

Download PDF

Engraved Artwork

Our signet rings can be ‘deep seal engraved’ by hand which is a very specific style of engraving whereby the image and lettering is carved very deeply and in reverse. This traditional technique means that when the ring is pressed into softened wax to form the seal the resulting impression reveals the correct image.

Engraved Artwork

Our cufflinks and pendants can be engraved in what is called a ‘deep for show’ style, this means that the crest or initials are engraved as seen (as opposed to deep seal engraving which is in reverse and used for signet rings). It is not as deep an engraving as seal engraving but it produces a more aesthetic look for cufflinks and pendants.

Select A Family Crest

You can select a family crest or Regimental badge to be engraved from our constantly expanding database.

Upload File

You can Upload your own artwork (crest, logo, monogram, initials etc) in png, gif, jpeg or jpg format. Please note that all artwork uploaded to an order is subject to approval of feasibility.

Some very intricate patterns such as full Coat of Arms can only be engraved on the largest head sizes and will incur a further charge (extra £250). We will contact you if this is the case before proceeding with your order.

Unengraved Ring

Have your ring blank/unengraved.

Optional Seal Engraved Family Motto

Seal engrave your family motto on a ribbon below the crest on your ring, cufflinks or pendant. If there is an associated motto with your family crest then it will appear; otherwise you can manually type one.

Inscription

A short personal message can be inscribed inside the band of the ring, a date or initials are popular choices. A maximum of 25 characters is possible.

Delivery note

We will be in contact with you once your item(s) are ready to be dispatched or collect. Your order will be completed in approximately 5-6 weeks, with the exception of the hardstone signet rings and any item in platinum which will take 12-14 weeks.

Initials

Have up to three initials engraved on the ring and choose from one of our house engraving styles. The initials will be deeply engraved for show (they will not be reverse seal engraved like the crested rings).

Head Size - Oxford Oval specific

There are four head sizes to choose from in our Oxford oval range. These are measured in millimetres by length and width of the oval plate edge to edge. The sizes are:

• 10x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)
• 16x13mm (Men’s large)

Head Size - Cushion specific

There are three head sizes to choose from in our cushion range. These are measured in millimetres by length and width of the cushion plate edge to edge. The sizes are:

• 9x8mm (Ladies regular)
• 12x10mm (Ladies large or Men’s small)
• 14x12mm (Men’s regular)

Head Size - Stone Set specific

There are four head sizes to choose from in our oval stone set range. These are measured in millimetres by length and width of the oval surface edge to edge (including the metal around the stone). The sizes are:

• 12x10mm (Ladies regular)
• 13x11mm (Ladies large or Men’s small)
• 15x13mm (Men’s regular)
• 17x15mm (Men’s large)

Finger Size

Download PDF

Download PDF

Engraved Artwork

Our signet rings can be ‘deep seal engraved’ by hand which is a very specific style of engraving whereby the image and lettering is carved very deeply and in reverse. This traditional technique means that when the ring is pressed into softened wax to form the seal the resulting impression reveals the correct image.

Engraved Artwork

Our cufflinks and pendants can be engraved in what is called a ‘deep for show’ style, this means that the crest or initials are engraved as seen (as opposed to deep seal engraving which is in reverse and used for signet rings). It is not as deep an engraving as seal engraving but it produces a more aesthetic look for cufflinks and pendants.

Select A Family Crest

You can select a family crest or Regimental badge to be engraved from our constantly expanding database.

Upload File

You can Upload your own artwork (crest, logo, monogram, initials etc) in png, gif, jpeg or jpg format. Please note that all artwork uploaded to an order is subject to approval of feasibility.

Some very intricate patterns such as full Coat of Arms can only be engraved on the largest head sizes and will incur a further charge (extra £250). We will contact you if this is the case before proceeding with your order.

Unengraved Ring

Have your ring blank/unengraved.

Optional Seal Engraved Family Motto

Seal engrave your family motto on a ribbon below the crest on your ring, cufflinks or pendant. If there is an associated motto with your family crest then it will appear; otherwise you can manually type one.

Inscription

A short personal message can be inscribed inside the band of the ring, a date or initials are popular choices. A maximum of 25 characters is possible.

Delivery note

We will be in contact with you once your item(s) are ready to be dispatched or collect. Your order will be completed in approximately 5-6 weeks, with the exception of the hardstone signet rings and any item in platinum which will take 12-14 weeks.

Initials

Have up to three initials engraved on the ring and choose from one of our house engraving styles. The initials will be deeply engraved for show (they will not be reverse seal engraved like the crested rings).